Tag: industrial wet scrubber

Finding the right Venturi scrubber manufacturers in India requires more than comparing equipment prices. A properly selected Venturi scrubber must match the actual gas flow, dust loading, particle size, gas temperature, chemical composition, required pressure drop, scrubbing-liquid chemistry and emission-control target of the plant.

Venturi scrubbers are widely considered for industrial applications where exhaust contains fine particulate matter, dust, fumes, aerosols or mist that needs to be removed through high-energy gas-liquid contact.

A Venturi scrubber can also assist with selected soluble gaseous pollutants when the correct scrubbing liquid and system configuration are used. However, gas absorption requirements may sometimes need an additional packed-bed or other scrubbing stage.

This guide explains how a Venturi scrubber works, its industrial applications, important design parameters, materials of construction and the factors buyers should check before approaching a Venturi scrubber manufacturer in India.

It also provides a comparison of 15 Venturi scrubber manufacturers and suppliers operating in the Indian market.

Quick Answer: A Venturi scrubber is a type of high-energy wet scrubber in which contaminated gas accelerates through a restricted throat and contacts finely dispersed scrubbing liquid. Particles are captured by the liquid droplets, after which a separator or mist eliminator removes the contaminated droplets from the cleaned gas stream. The U.S. EPA identifies the Venturi as one of the most common high-energy wet scrubber designs for particulate control.

What Is a Venturi Scrubber?

A Venturi scrubber is an industrial air pollution control device used to remove particulate matter and certain other contaminants from an exhaust gas stream.

It belongs to the broader category of wet scrubbers because a liquid—commonly water or a chemically treated solution—is brought into direct contact with the contaminated gas.

The key feature of a Venturi scrubber system is its converging throat.

As the gas enters this narrow section, its velocity increases considerably. Scrubbing liquid introduced around or inside the throat is broken into small droplets.

Dust particles and aerosols collide with these droplets and become entrained in the liquid.

The gas-liquid mixture then moves toward a separator, cyclone or mist eliminator so that liquid droplets containing captured pollutants can be removed before the cleaned gas leaves the system.

How Does a Venturi Scrubber Work?

The working principle of an industrial Venturi scrubber can be understood in five basic stages.

1. Polluted Gas Enters the Scrubber

Dust-laden or contaminated exhaust enters the converging section of the Venturi.

Gas flow, inlet temperature, dust concentration and particle-size distribution are important design inputs at this stage.

2. Gas Accelerates Through the Venturi Throat

The cross-sectional area becomes smaller at the throat.

This increases gas velocity and produces the turbulent conditions required for effective interaction between the pollutants and the scrubbing liquid.

3. Scrubbing Liquid Is Introduced

Water or another suitable scrubbing liquid is injected around the throat.

The high-velocity gas breaks the liquid into relatively fine droplets.

4. Pollutants Contact Liquid Droplets

Particles collide with and become captured by the droplets.

Venturi scrubbers rely heavily on this high-energy gas-liquid interaction, which is why pressure drop and energy consumption are important design and operating considerations.

5. Droplets Are Separated From the Gas

The gas-liquid mixture leaving the Venturi requires downstream separation.

A cyclone separator, droplet separator, demister or mist eliminator may be provided depending on the equipment configuration.

The EPA notes that wet scrubber systems incorporate entrainment-separation arrangements because droplets leaving the contacting zone contain collected contaminants.

What Pollutants Can a Venturi Scrubber Remove?

A Venturi scrubber for air pollution control is primarily associated with particulate removal.

Typical pollutants may include:

• Industrial dust
• Fine particulate matter
• Fly ash
• Process fumes
• Aerosols
• Mists
• Metal fumes
• Pigment dust
• Mineral particles
• Certain soluble or reactive gases when suitable scrubbing chemistry is provided

Venturi scrubbers are particularly relevant when fine particulate control is required.

The EPA notes that Venturi scrubbers are primarily used for particulate matter, including PM10 and PM2.5, while their effectiveness for gases depends strongly on characteristics such as gas solubility and system design.

This distinction is important.

A buyer should not assume that every wet Venturi scrubber will automatically handle every gaseous pollutant. The pollutant chemistry, contact time, reagent and downstream treatment stages must all be evaluated.

Where Are Industrial Venturi Scrubbers Used?

Industrial Venturi scrubbers can be considered in plants generating particulate-rich or contaminated exhaust streams.

Common application areas include:

• Chemical manufacturing plants
• Fertilizer plants
• Pigment manufacturing
• Mineral processing
• Metal processing
• Foundries
• Steel plants
• Furnace exhaust systems
• Boiler and thermal-process exhaust
• Incineration systems
• Bulk-material handling plants
• Cement and mineral-related processes
• Pharmaceutical processing
• Industrial gas-cleaning systems
• Dust- and fume-extraction systems

The final configuration should always be selected based on actual process conditions rather than industry name alone.

Major Components of a Venturi Scrubber System

A complete industrial Venturi scrubber may contain more than the Venturi body itself.

Depending on project scope, the system can include:

Venturi Body

The main fabricated body provides the converging, throat and diverging sections required for gas acceleration and recovery.

Venturi Throat

This is one of the most important sections of the scrubber because gas-liquid interaction is strongly influenced by throat geometry and velocity.

Liquid Injection Header

The header supplies scrubbing liquid to the required injection points.

Nozzle arrangement and liquid distribution should match the scrubber design.

Recirculation Tank

Collected liquid may be routed to a tank for separation, treatment, recirculation or disposal.

Recirculation Pump

The pump maintains the required flow of scrubbing liquid through the system.

Droplet Separator or Mist Eliminator

This section limits liquid carryover from the scrubber outlet.

ID Fan or Exhaust Fan

A suitable fan may be used to overcome system resistance and maintain the required exhaust flow.

Ducting

Ducting connects process equipment, scrubber, separator, fan and stack.

Inspection and Cleaning Access

Inspection doors, drains, flushing provisions and maintenance openings become particularly important when sticky, abrasive or solids-rich pollutants are handled.

Which Materials Are Used to Manufacture Venturi Scrubbers?

The material of construction should be selected from the actual process chemistry and temperature rather than simply choosing stainless steel for every project.

A Venturi wet scrubber manufacturer may offer different materials depending on the application.

Mild Steel or Carbon Steel

MS or carbon steel can be used when process chemistry permits.

Protective coating or lining may be required where moisture or corrosive contaminants are expected.

Stainless Steel

SS 304, SS 316 and SS 316L may be considered for different corrosive or process conditions.

Material grade must be selected according to the actual chemicals, chlorides and temperature involved.

Rubber-Lined Steel

Rubber lining can provide an additional corrosion barrier for suitable chemical duties.

FRP or PP/FRP

FRP and PP/FRP are commonly considered for corrosive applications where operating temperature and mechanical conditions permit their use.

Special Materials or Linings

Epoxy lining, special coatings or other corrosion-resistant arrangements may be selected for project-specific conditions.

National Engineers & Steel Fabricators, for example, publicly lists SS, CS, MS and lined construction for its project-specific Venturi scrubber fabrication.

Important Design Parameters for a Venturi Scrubber

A professional industrial Venturi scrubber manufacturer should request operating data before finalising equipment dimensions.

Important parameters include:

Design Parameter	Why It Matters
Gas flow rate	Determines equipment size and throat geometry
Inlet gas temperature	Affects MOC, cooling and downstream conditions
Dust loading	Influences liquid requirement and solids handling
Particle-size distribution	Critical for estimating collection performance
Pollutant chemistry	Influences scrubbing liquid and corrosion risk
Required outlet emission	Defines performance target
Pressure drop	Influences particulate capture and fan power
Liquid-to-gas ratio	Affects gas-liquid contacting and water use
Scrubbing liquid chemistry	Important for gas absorption and corrosion
Moisture/condensation	Influences material and drainage design
Available utilities	Determines pump, water and electrical requirements
Duct layout	Affects equipment arrangement and integration
Material of construction	Determines corrosion and service-life suitability
Maintenance access	Important for cleaning, inspection and nozzle servicing

Pressure drop is particularly important.

Increasing gas-liquid relative velocity can improve the capture of smaller particles, but higher velocity generally increases pressure drop, fan power and operating cost.

Top 15 Venturi Scrubber Manufacturers in India

The companies below have publicly available information indicating involvement in Venturi scrubbers, wet scrubbers or associated industrial air-pollution-control systems.

This is an editorial comparison list, not an independent certification or audited performance ranking. Buyers should compare each manufacturer using project-specific technical and commercial requirements. National Engineers & Steel Fabricators is presented first as the featured manufacturer for this guide.

No.	Manufacturer	Location / Market	Publicly Listed Capability
1	National Engineers & Steel Fabricators	Surat, Gujarat	Custom Venturi scrubbers, wet scrubbers, internals, ducting and lined fabrication
2	TNBi Industries	Pune, Maharashtra	Venturi, packed-bed and multi-stage scrubbing systems
3	INDOFAN Pvt. Ltd.	India	Custom Venturi scrubbers and turnkey pollution-control solutions
4	Vayuvents Private Limited	Vasai, Maharashtra	Venturi fume and industrial wet scrubbers
5	Ascent Machineries & Engg. Services	Mumbai, Maharashtra	Custom industrial Venturi scrubbers
6	Coimbatore Aerodyne Pvt. Ltd.	Coimbatore, Tamil Nadu	Venturi and industrial wet scrubber systems
7	UAT Private Limited	Vadodara, Gujarat	Venturi and packed-bed scrubbers
8	Ronak Industries	Ghaziabad, Uttar Pradesh	FRP wet and Venturi scrubber systems
9	Constraarch-Enviro	Moradabad, Uttar Pradesh	Venturi wet scrubbers and pollution-control systems
10	Aerotech Equipments & Projects Pvt. Ltd.	Greater Noida, Uttar Pradesh	Venturi and industrial scrubber equipment
11	Eram Solutions	New Delhi	Custom Venturi wet scrubbers
12	NUSID Clean Tech Pvt. Ltd.	Ballabgarh, Haryana	Venturi, packed-bed and dust-control systems
13	Gopinath Enterprise	Ahmedabad, Gujarat	Venturi scrubbers and pollution-control equipment
14	Bioline Technologies	Thane, Maharashtra	Venturi scrubbers and gas-scrubbing systems
15	B. D. Fans & Enviro Engineering	Kolkata, West Bengal	Venturi scrubbers, fans and dust-control equipment

1. National Engineers & Steel Fabricators – Surat, Gujarat

National Engineers & Steel Fabricators (NESF) is the featured company in this list of Venturi scrubber manufacturers in India.

Based in Sachin GIDC, Surat, Gujarat, the company manufactures project-specific Venturi scrubber assemblies for industrial gas cleaning and pollution-control applications.

NESF states that its scrubbers can be fabricated according to gas flow rate, dust loading, gas temperature, gas chemistry, duct size, liquid-injection requirement, material of construction, lining requirement, separator interface, inspection scope and project documentation.

Its Venturi scrubber fabrication scope can include the Venturi body, throat section, liquid-injection headers, nozzles, flanges, inspection doors, drains, supports, separator interfaces and corrosion-protection provisions.

Available fabrication options include SS, CS, MS and lined construction.

NESF also manufactures associated wet-scrubber systems, scrubber internals and industrial ducting, which can help when the project requires fabricated equipment beyond the scrubber body alone.

For plants seeking a Venturi scrubber manufacturer in India for drawing-based, duty-specific or custom-fabricated equipment, National Engineers & Steel Fabricators can be evaluated for:

• Custom Venturi scrubber fabrication
• Venturi throat fabrication
• Liquid injection headers
• Scrubber internals
• Mist eliminator and separator interfaces
• MS, CS and SS fabrication
• Rubber-, epoxy- or FRP-lined fabrication support
• Industrial ducting and flue-gas lines
• Support structures and lifting arrangements
• Inspection and testing documentation as agreed

Industries stated on the company’s Venturi scrubber page include chemical plants, mineral-processing units, fertilizer plants, pigment industries, metal-processing units, boiler-exhaust systems and bulk-handling plants.

2. TNBi Industries

TNBi Industries, based in Pune, offers multiple industrial gas-cleaning technologies including Venturi scrubbers, packed-bed scrubbers, multi-stage scrubbers, activated-carbon systems and flue-gas-desulfurization solutions.

The company describes its Venturi technology as suited to particulate and gas-treatment applications and publicly discusses a patented Venturi scrubber design.

Buyers comparing air pollution control equipment manufacturers in India may evaluate TNBi where multiple scrubber configurations need to be considered for one process.

3. INDOFAN Pvt. Ltd.

INDOFAN offers customised Venturi scrubber systems for industries such as steel, foundry, cement, thermal-power, chemical, incineration and metal-processing applications.

Its published Venturi scrubber information lists carbon steel, stainless steel, FRP, rubber-lined steel and other application-specific construction materials.

The company also states that its scope can extend from process evaluation and engineering to manufacturing, installation and commissioning.

4. Vayuvents Private Limited

Vayuvents, located in the Vasai region of Maharashtra, manufactures Venturi and other industrial wet-scrubbing systems.

Its publicly available range includes vertical Venturi scrubbers, Venturi wet scrubbers, fume scrubbers and packed-bed systems for industrial exhaust treatment.

The company can therefore be included when comparing industrial wet scrubber manufacturers in India for dust, fumes and process-exhaust applications.

5. Ascent Machineries & Engg. Services

Mumbai-based Ascent Machineries & Engineering Services offers custom Venturi scrubbers as part of its industrial process and pollution-control equipment range.

Its published specifications reference material options including SS304, SS316 and FRP and indicate that equipment size and operating requirements can be customised according to application conditions.

6. Coimbatore Aerodyne Pvt. Ltd.

Coimbatore Aerodyne manufactures wet-scrubbing equipment including packed-bed scrubbers, Venturi scrubber systems and industrial Venturi wet scrubbers.

Its published product range includes systems for steel, chemical, acid-mist and other industrial pollution-control duties.

The company can be compared by buyers looking for a Venturi wet scrubber manufacturer in South India.

7. UAT Private Limited

Vadodara-based UAT Private Limited manufactures industrial air-movement and pollution-control equipment.

Its portfolio publicly lists Venturi scrubbers, packed-bed scrubbers, dust collectors, ID fans, blowers and related systems.

This range can be relevant where the project requires both a scrubber and associated gas-handling equipment.

8. Ronak Industries

Ronak Industries of Ghaziabad manufactures industrial scrubber systems and publishes a specific wet-scrubber-with-Venturi configuration.

Its Venturi product information lists FRP construction and custom gas-flow capability for industrial applications.

Ronak also supplies other fume and industrial scrubber systems, making it another company buyers can compare for corrosive wet-scrubbing duties.

9. Constraarch-Enviro

Constraarch-Enviro, based in Moradabad, supplies pollution-control and water-treatment systems.

Its air-pollution-control range includes Venturi wet scrubbers intended for fume and dust extraction along with other wet-scrubbing and dust-collection equipment.

The company may be evaluated where the project combines air-pollution-control equipment with broader environmental-treatment requirements.

10. Aerotech Equipments & Projects Private Limited

Greater Noida-based Aerotech Equipments & Projects lists Venturi scrubbers within its industrial scrubber and air-pollution-control equipment range.

Its product portfolio also covers blowers, fans and dust-control equipment.

Buyers should compare actual duty conditions, required MOC and performance data when requesting a project-specific quotation.

11. Eram Solutions

Eram Solutions, New Delhi, offers custom Venturi wet scrubbers for industrial particulate, mist, fume and gas-treatment applications.

Its published specifications describe multiple MOC possibilities including stainless steel, mild steel, FRP and carbon steel along with project-specific airflow and capacity options.

For corrosive or unusual gas streams, the chemical compatibility of the selected material and scrubbing liquid should be verified during engineering.

12. NUSID Clean Tech Private Limited

NUSID Clean Tech, based in Ballabgarh, Haryana, manufactures dust-control, filtration and pollution-control systems.

Its publicly listed scrubber range includes Venturi and packed-bed scrubbers alongside dust collectors, fume extraction systems, centrifugal blowers and industrial cleaning systems.

It can therefore be included in evaluations where the buyer is comparing multiple dust- and fume-control technologies.

13. Gopinath Enterprise

Ahmedabad-based Gopinath Enterprise offers Venturi scrubbers as part of its pollution-control equipment portfolio.

Its published system information includes different construction options and components such as liquid recirculation arrangements and mist eliminators.

The company also supplies other pollution-control and environmental-treatment equipment.

14. Bioline Technologies

Bioline Technologies provides industrial gas-scrubbing and air-pollution-control systems from Maharashtra.

Its product range includes Venturi scrubbers and configurations combining Venturi and packed-bed stages.

The company explains that single-stage systems may use either a Venturi or packed-bed scrubber, while a two-stage arrangement can combine both technologies when required.

This can be relevant where fine-particle collection and gas absorption need to be considered together.

15. B. D. Fans & Enviro Engineering

B. D. Fans & Enviro Engineering operates from Kolkata and is listed as a supplier of Venturi scrubbers along with industrial fans, dust collectors and fume-extraction equipment.

Companies requiring both exhaust-gas movement and dust-control equipment may include the firm in their technical comparison.

How to Choose the Right Venturi Scrubber Manufacturer in India

Selecting among Venturi scrubber manufacturers in India should be based on engineering capability rather than simply comparing the lowest initial quotation.

1. Check Whether the Manufacturer Requests Process Data

A quotation issued without understanding gas flow, pollutant loading, temperature and chemistry may not represent the actual operating requirement.

2. Evaluate Venturi Throat Design

The Venturi throat strongly influences gas velocity, liquid atomisation, pressure drop and collection behaviour.

Ask the manufacturer how throat dimensions are selected for your process conditions.

3. Confirm the Required Material of Construction

Provide details of acids, alkalis, chlorides, moisture, abrasive dust and operating temperature.

The correct MOC may significantly improve equipment reliability.

4. Ask About Pressure Drop

Higher pressure drop can increase particulate collection capability but normally also increases fan energy.

The manufacturer should explain the expected operating pressure drop rather than simply quote an efficiency percentage.

5. Check Liquid Distribution

Liquid flow and distribution are important for effective gas-liquid contact.

Poor liquid distribution can reduce scrubber performance.

6. Evaluate Droplet Separation

A high-performance Venturi section is only part of the system.

The collected droplets must also be separated effectively from the gas stream.

7. Check Maintenance Access

Inspection doors, flushing points, drains and accessible nozzles can simplify maintenance considerably.

8. Discuss Slurry and Waste-Liquid Handling

Captured contaminants do not disappear.

They transfer into the scrubbing liquid.

The plant therefore needs an appropriate recirculation, blowdown, sludge handling or wastewater-treatment arrangement.

9. Review Documentation

Depending on the project, buyers may need:

• GA drawings
• Fabrication drawings
• MOC details
• Welding documentation
• Inspection reports
• Leak-test reports
• Painting or lining specifications
• Motor and pump data
• Instrument data
• Operating and maintenance information

10. Compare Complete Lifecycle Cost

The cheapest scrubber body is not automatically the most economical system.

Fan power, pump power, water consumption, chemical consumption, maintenance, corrosion resistance, spare parts and equipment life should also be evaluated.

Venturi Scrubber vs Packed-Bed Scrubber vs Spray Scrubber

Different wet-scrubber technologies solve different pollution-control problems.

Feature	Venturi Scrubber	Packed-Bed Scrubber	Spray Scrubber
Primary strength	Fine particulate capture	Gas absorption	Coarser particles, cooling and gas-liquid contact
Energy requirement	Generally higher	Moderate, design dependent	Generally lower
Pressure drop	Relatively high	Design dependent	Relatively low
Fine dust handling	Strong application area	Usually not preferred for heavy particulate loading	Lower capability than high-energy Venturi
Soluble gas absorption	Possible but application dependent	Strong application area	Possible for suitable duties
Plugging concern	Nozzles/throat/solids areas require attention	Packing may foul with heavy solids	Relatively simple internals
Typical selection basis	Fine particles and high-energy contacting	Absorption and chemical scrubbing	Simpler wet contacting and cooling

The EPA describes spray towers as relatively low-energy scrubbers and Venturi scrubbers as common high-energy wet scrubbers for particulate collection.

Packed-bed scrubbers, meanwhile, provide enhanced gas-liquid contact and are commonly used where soluble-gas absorption or chemical scrubbing is the primary objective.

A multi-stage system can be considered when one equipment type cannot efficiently address all contaminants.

What Information Should You Send to a Venturi Scrubber Manufacturer for a Quote?

A detailed enquiry helps a Venturi scrubber supplier in India prepare a more technically relevant proposal.

Include the following information wherever available:

Process Information

• Process or equipment generating the exhaust
• Type of fuel or raw material
• Operating hours
• Continuous or batch operation

Gas Data

• Gas flow in CFM, CMH or Nm³/hr
• Minimum, normal and maximum gas flow
• Inlet gas temperature
• Moisture
• Pressure condition
• Gas composition

Pollutant Data

• Dust concentration
• Particle-size distribution
• Type of dust
• Fumes or mist present
• Acidic or alkaline gases
• Chemical composition
• Expected inlet concentration

Required Performance

• Required outlet particulate level
• Applicable project specification
• Required removal performance
• Available pressure-drop allowance

Mechanical Requirements

• Preferred MOC
• Corrosion allowance
• Lining requirement
• Inlet and outlet duct size
• Equipment orientation
• Available installation space

Utility Data

• Water availability
• Water quality
• Electrical supply
• Compressed air if needed
• Chemical dosing requirements

Site and Documentation Requirements

• Indoor or outdoor installation
• Location and environmental conditions
• Inspection requirements
• Documentation requirements
• Installation and commissioning scope

Providing these inputs makes it easier for an industrial gas scrubber manufacturer to design the system around actual plant conditions.

What Affects Venturi Scrubber Price in India?

There is no single standard price for an industrial Venturi scrubber.

Equipment cost can change considerably depending on project specifications.

Important cost factors include:

• Gas-handling capacity
• Venturi dimensions
• Material of construction
• Plate thickness
• Stainless-steel grade
• Internal lining
• Abrasion protection
• Dust loading
• Required pressure drop
• Recirculation tank
• Pump capacity
• Separator design
• Mist eliminator
• ID fan
• Ducting
• Support structure
• Platform and ladder requirement
• Instrumentation
• Chemical dosing
• Surface treatment
• Testing
• Inspection
• Transportation
• Site erection
• Commissioning

This is why buyers comparing Venturi scrubber suppliers in India should send the same technical specification to each supplier rather than comparing unrelated catalogue prices.

Venturi Scrubber Maintenance Requirements

Routine maintenance has a direct effect on scrubber reliability and performance.

The EPA identifies issues such as insufficient liquid flow, poor gas-liquid contact, re-entrainment, corrosion and plugging of nozzles or mist eliminators as common wet-scrubber operating concerns.

A practical maintenance programme should therefore check:

Scrubbing-Liquid Flow

Confirm that required flow and pressure are maintained.

Spray Nozzles

Inspect for blockage, erosion and uneven spray.

Venturi Throat

Check high-velocity areas for abrasion, erosion, scaling or buildup.

Mist Eliminator

Inspect for solids buildup, corrosion and blocked passages.

Recirculation Tank

Remove accumulated sludge and control solids concentration.

Pumps

Check seals, bearings, flow and discharge pressure.

Ducting

Inspect for corrosion, leakage, buildup and condensation.

Linings and Coatings

Look for cracks, blistering, delamination or exposed metal.

Differential Pressure

An unexpected change in pressure drop can indicate a process, flow or maintenance problem.

The EPA identifies pressure differential and liquid flow rate among the primary indicators used to monitor particulate-control wet scrubber performance.

Why Custom Venturi Scrubber Design Matters

Two factories in the same industry may still need very different scrubber systems.

Gas volume, pollutant characteristics, temperature, operating hours, plant layout and emission targets can all differ.

A catalogue-size unit selected only from airflow may therefore overlook several important variables.

For example, a process with highly abrasive mineral dust may require attention to wear protection around the throat.

A corrosive chemical exhaust may need a different MOC or lining.

A process generating both fine dust and soluble gases may require a Venturi stage followed by another gas-absorption stage.

This is why a capable wet scrubber manufacturer in India should consider the complete duty rather than treating the Venturi body as an isolated fabrication item.

Final Thoughts

Choosing among Venturi scrubber manufacturers in India requires careful evaluation of process data, equipment design, material compatibility, pressure drop, gas-liquid contacting, droplet separation, maintenance and complete lifecycle requirements.

The right solution should not simply be a standard vessel attached to an exhaust line.

It should be engineered around the actual gas flow, particulate characteristics, operating temperature, chemical environment and required emission performance.

National Engineers & Steel Fabricators, based in Surat, Gujarat, manufactures custom Venturi scrubber assemblies for industrial dust, fume, mist and gas-cleaning applications.

The company can fabricate Venturi bodies, throat sections, liquid-injection arrangements, separator interfaces, scrubber internals, industrial ducting and associated fabricated components in SS, CS, MS or lined construction according to project requirements.

For a project-specific enquiry, provide gas flow rate, dust loading, particle size if available, inlet temperature, gas chemistry, required emission target, duct dimensions, preferred material of construction and site layout.

This information allows the Venturi scrubber manufacturer to evaluate the requirement and propose a more appropriate industrial pollution-control solution.

Frequently Asked Questions About Venturi Scrubbers